Discover DJI Spreading Wings S1000+ + A2 + Zenmuse Z15-5D III (HD)

By: DJI

Model: CB.SB.000025

Sku: 151S6BJLPB

Availability: Out of stock New

Availability: Out of stock

  • Z15 3-Axis Gimbal for Canon 5DIII
  • Gimbal Stabilizes Canon 5DIII
  • Aluminum Mounts for Enhanced Durability
  • HDMI Output for Lightbridge System
Stock Request Notify When Available
  • Add to Wishlist
  • Add to Compare

The Spreading Wings S1000 Premium Octocopter with Zenmuse Z15-5D III (HD) and A2 is a bundle from DJI that features the S1000 Octocopter and the Zenmuse Z15-5D (HD) 3-axis gimbal that is specifically configured for the Canon 5D Mark III. The S1000 is a collapsible, eight-propeller RC helicopter designed to carry a DSLR or similar-sized camera. The aircraft is intended to serve as a platform that, combined with the gimbal, allows professional videographers and photographers to add dynamic aerial shots to their productions.

It features the DJI A2 flight control system, a collection of hardware components that control mixing, regulate power, provide sensor data, and include a 2.4 GHz DR16 receiver. The flight control system features attitude and GPS attitude flight modes, offering the pilot varying degrees of autopilot intervention depending on skill level and preference. In GPS mode it is possible to hover in a fixed position, which is ideal for capturing static video shots. In attitude mode, the flight controller will use IMU data to keep the aircraft stable, but when hovering it may drift due to inertia or wind currents. The A2 also features return to home, Intelligent Orientation Control, and other features made possible thanks to computerized, GPU-based flight control. The built-in receiver is compatible with Futaba FASST series and DJI DESST series transmitters (radio controllers). Third-party receivers are also supported.

For stabilizing and moving the camera in flight, this bundle features the Zenmuse Z15-5D (HD), a 3-axis gimbal specifically for the Canon 5D Mark III DSLR. The airframe features a dampened gimbal mounting bracket with a low mounting position. Additionally, the landing gear can be raised, allowing an unobstructed 360° of visibility. This the HD version of the gimbal which means there is an HDMI signal relay through it for connecting the Lightbridge Air Unit. For the moment the gimbal is calibrated specifically for use with the Canon EF 24 mm f/2.8 IS USM lens. However, support for addition lenses is expected to be added in the future.

In the Box

  • DJI Spreading Wings S1000+
  • Frame Arms ×8
  • Landing Skid Tubes ×2 (with Silicone Rubber Dampers)
  • Landing Gear Legs ×2
  • GPS Collapsible Mount
  • Springs ×2
  • Connector Set
  • 3-PIN Connection Cables ×8
  • CW propellers ×2
  • CCW propellers ×2
  • Magic tapes ×4
  • The red knobs ×8
  • Soft dampers ×50
  • Screw For frame arms mount: M4×35
  • Screw For landing gear mount: M3×8, M2.5×8 (socket cap), M3×22 (socket cap)
  • Controller Unit (Built-in Receiver DR16)
  • PMU(Power Management unit)
  • IMU(Inertia Measurement Unit)
  • LED-BT-I
  • GPS-COMPASS PRO
  • Micro-USB Cable
  • Servo Cables (2)
  • GPS Bracket
  • Double side sticky pads.
  • Gimbal
  • Gimbal Control Unit (GCU)
  • Lens Retaining Ring
  • Mounting Bracket × 4
  • Mounting Board for Receiver
  • Cable Clamp
  • Camera Mount Screw x 2
  • Lens Retaining Ring Screw
  • Screw Package
  • 10-Pin to 9-Pin Cable × 2
  • 7-Pin Cable
  • 8-Pin to 6-Pin Cable × 2
  • Servo Cable Package
  • AV Video Power Cable
  • iOSD Mark II Cable
  • Micro-USB Cable
  • CAN-Bus Cable
  • Spare Package